PDA

View Full Version : HHP Carolina/SMAF Open Dyno Day 10/29/2011 from 9 am unitl...


Jeff@HHP
10-12-2011, 09:08 AM
Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run.

jmd
10-12-2011, 09:11 AM
sounds like fun.

cobraetti
10-12-2011, 09:19 AM
will be alot of fast rides:bigthumb:

chrisheltra
10-12-2011, 09:30 AM
Id like to throw mine on there with the race tune to check it out. IIRC your dyno isnt loaded correct?

ForceFed4g63
10-12-2011, 09:33 AM
That's a great price!

silver fox
10-12-2011, 10:18 AM
Do you have a way to read air fuel? Do you get to make changes between pulls?

DolSVT00
10-12-2011, 10:19 AM
will be alot of Stock rides:bigthumb:
Fixed
Id like to throw mine on there with the race tune to check it out. IIRC your dyno isnt loaded correct?

Pretty sure its a dynojet without a brake. Let me know if you do it, I'll lock the converter in that tune and you'll get some big numbers.

ForceFed4g63
10-12-2011, 10:25 AM
Do you have a way to read air fuel? Do you get to make changes between pulls?




Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run.


...

yota
10-12-2011, 10:30 AM
hate i'm going to miss out on this :( somebody post up plenty of pics and vids!

Harry
10-12-2011, 11:13 AM
I may have to bring mine for this.

PapaBear
10-12-2011, 11:31 AM
Wish it was AWD dyno.....

LXtasy
10-12-2011, 12:18 PM
Blazer might spin the rollers. Have to see if what we have done is getting put down to the ground

Joker
10-12-2011, 01:54 PM
I still need a tune haha

LadyInRed
10-12-2011, 08:51 PM
Might bring the Mustang out again, depending on how busy our morning is with cookout prep.

1998ta__1991rs
10-12-2011, 09:02 PM
damn, gotta work

BAD BOB
10-12-2011, 09:35 PM
might let the rcf see the dyno for the first time eva!

03SVTCOBRA
10-12-2011, 09:36 PM
might let the rcf see the dyno for the first time eva!

At least go last so you dont break it too early :bigthumb:

Blue Skunk
10-12-2011, 09:43 PM
Do you have to pre-register or is it first come first serve?

BAD BOB
10-12-2011, 10:05 PM
At least go last so you dont break it too early :bigthumb:

what? break the car? bc that all that will probably break!

cliff-1972
10-12-2011, 11:14 PM
Jeff,able to dyno diesels yet???

k5hart
10-13-2011, 07:39 AM
Might try to bring my Blazer. Curious how slow it is.

ElecTech
10-13-2011, 07:59 AM
Do you have a way to read air fuel? Do you get to make changes between pulls?

This would depend on the extent of the "changes".

If you want to:

Load a different calibration file

one run off gas and the other on

A simple jet change that can be done externally (doesn't require bowl removal)


These things we should be able to allow, but in order to keep the flow of cars gowing, they need to be quick. Please have everything ready to go and any tools you may need with you.

This is by no means absolute and would also depend on the volume of cars we need to run through.

Shane361
10-13-2011, 08:20 AM
I dont forsee ALOT of our cars being on the dyno. Most of the day will be other cars in the area. Good day to get together and BS for sure. Love seeing other types of cars out and about. Wish my Cobra was back and ready but she just isn't finished yet.-Shane

ElecTech
10-13-2011, 08:24 AM
Gonna try and put my turtle on there to show everyone what 300 HP really looks like!

BAD BOB
10-13-2011, 09:52 AM
what does the dyno max out at? just wondering

Derek
10-13-2011, 10:00 AM
Gonna try and put my turtle on there to show everyone what 3000 Hosspowas really looks like!

Fuxed

ElecTech
10-13-2011, 10:08 AM
what does the dyno max out at? just wondering

2000 HP. That gonna be enough?

ElecTech
10-13-2011, 10:09 AM
Originally Posted by ElecTech
Gonna try and put my turtle on there to show everyone what 3000 Hosspowas really looks like!

Gonna need about 4 more turbos for that.

BAD BOB
10-13-2011, 10:10 AM
2000 HP. That gonna be enough?

guess we will see!

ElecTech
10-13-2011, 10:23 AM
guess we will see!

:mrgreen: Looking forward to it!

slowgreen99
10-13-2011, 11:25 AM
Can you leave room for a trailer queen race car to unload? lmao

chrisheltra
10-13-2011, 11:30 AM
I reserved a whole section of parking spaces for CHP. Just follow the signs.

http://img.auctiva.com/imgdata/1/2/9/8/1/3/5/webimg/468205696_tp.jpg

slowgreen99
10-13-2011, 11:31 AM
lmao! A lot of unicorns have been out this year though!

silver fox
10-13-2011, 12:40 PM
Can you leave room for a trailer queen race car to unload? lmao

Maybe we all can meet up that day get a bite to eat and drive our street car to the dyno. You, Bad Bob and me and any body else that wants to come.Just Sayn:mrgreen:

BAD BOB
10-13-2011, 01:08 PM
there is nowhere for jeff to get his race gas on the way so i dont think he can but ill be glad to drive mine out there and get the highest on the dyno!

silver fox
10-13-2011, 01:24 PM
Do you make over 1,000 to the rear wheels?

silver fox
10-13-2011, 01:36 PM
Hello cat got your tongue? I mean your key board.

1iron
10-13-2011, 01:38 PM
might let the rcf see the dyno for the first time eva!

Silverfox ^^^^^^^^^^

silver fox
10-13-2011, 01:49 PM
My bad started smoking this shit to early today. I guess we will see on dyno day who has what.

03SVTCOBRA
10-13-2011, 02:13 PM
Do you make over 1,000 to the rear wheels?

Doesnt everyone on here? I thought that was a requirement when you signed up.

BAD BOB
10-13-2011, 02:55 PM
i would almost bet that jeff wont run his car on the dyno infront of people anyways. oh and with the new turbo and engine i think it should be very close!

silver fox
10-13-2011, 02:58 PM
Who said it was Jeff car?:mrgreen:

bwelch
10-13-2011, 03:03 PM
i would almost bet that jeff wont run his car on the dyno infront of people anyways. oh and with the new turbo and engine i think it should be very close!

Oh snap!...You must have gotten the 6.0 and the 88mm installed!:hysterical:

BAD BOB
10-13-2011, 03:06 PM
oh snap! you finally got you a car going or are you speaking of someone else that you crew cheif for?

rm1
10-13-2011, 03:10 PM
i would almost bet that jeff wont run his car on the dyno infront of people anyways. oh and with the new turbo and engine i think it should be very close!
No, but i will run you Oct.30th in front of people at Dorchester. Heads up, flip for lanes, any tire, any fuel, any power adder. Badbobs 3rd loss in a row coming soon, get ready.

JTStreet
10-13-2011, 03:10 PM
damn, gotta work

You would have blown that dynojet up anyway.

Where is this happening? I wouldn't mind bringing my pile out.

silver fox
10-13-2011, 03:18 PM
No, but i will run you Oct.30th in front of people at Dorchester. Heads up, flip for lanes, any tire, any fuel, any power adder. Badbobs 3rd loss in a row coming soon, get ready.

Wait for it. Wait for it. Wait for it. DAMN. I know I been smoking a lot shit today. Can't wait. Couple people called and told me to post this. Lock in 1,000 on 3 or better:eek2:

trickey
10-13-2011, 03:21 PM
Behind Jamison Corvette on Ashley Phosphate.

BAD BOB
10-13-2011, 03:22 PM
if i got the new tires on the car and at the track that day i would sure as hell line up next to you. how bout to make it fair since dorchester has one not so good lane, we run one in each lane?

silver fox
10-13-2011, 03:24 PM
How much you need for tire are what tires you need I will loan you the money.

rm1
10-13-2011, 03:28 PM
Flip for lanes.

BAD BOB
10-13-2011, 03:50 PM
dont need a loan

and why you not want to run one in each? rather take a win from me spinning than actually making it down the track on a decent pass?

JTStreet
10-13-2011, 04:03 PM
I'm going to see if I can get my Ford GT cams dropped in before this. I'm interested to see what kind of power it's going to make then.

rm1
10-13-2011, 04:04 PM
Thats the race i offered. You might get the lane you want. I will be there Oct 30th looking for you. Dont want to go back and forth on here. You have my number..

BAD BOB
10-13-2011, 04:10 PM
yes sir

JTStreet
10-13-2011, 04:12 PM
My bad started smoking this shit to early today. I guess we will see on dyno day who has what.

Way to gay it up and make it a dick measuring contest. Come out, and have fun. ;)

silver fox
10-13-2011, 04:22 PM
Way to gay it up and make it a dick measuring contest. Come out, and have fun. ;)

I'm not sure what you are trying to say. I think you said you are gay and want to suck my dick. I don't go that way buddy.

JTStreet
10-13-2011, 04:35 PM
I'm not sure what you are trying to say. I think you said you are gay and want to suck my dick. I don't go that way buddy.

What are you, six years old? You better come up with some material for the 21st century, or you will never be the man your mother is. :razz::poke:

silver fox
10-13-2011, 04:40 PM
I tell you what. Pm me your # asshole and we meet I will show you what kind a man I am.

JTStreet
10-13-2011, 04:41 PM
I tell you what. Pm me your # asshole and we meet I will show you what kind a man I am.

Wow man, are you serious? Because I certainly wasn't. Chill out before your little head explodes, and realize when people are just kidding around before give yourself an aneurysm.

Harry
10-13-2011, 05:58 PM
On a lighter note. I too am interested if there is room to unload a trailer?

bwelch
10-13-2011, 06:07 PM
Wait for it. Wait for it. Wait for it. DAMN. I know I been smoking a lot shit today. Can't wait. Couple people called and told me to post this. Lock in 1,000 on 3 or better:eek2:

Is that a 1,000 pennies on $3 or better? Or is it $3,000?

Matts94Z28
10-13-2011, 06:07 PM
On a lighter note. I too am interested if there is room to unload a trailer?

Racecar!

98nbmz
10-13-2011, 06:22 PM
Might bring the maro to see how much the 400 eats powa.

BAD BOB
10-13-2011, 06:26 PM
im sure you can unload in the median of ashley phos. or pull in front of some house by the shop

silver fox
10-13-2011, 07:01 PM
Is that a 1,000 pennies on $3 or better? Or is it $3,000?

I sure they are talking $3 thousand dollars. That shouldnt be a problem for your crew. Brandon tried to lock me in for thousands. He reached in his pocket and pulled it out. Last time I was at Dorchester.

Matts94Z28
10-13-2011, 07:41 PM
I sure they are talking $3 thousand dollars. That shouldnt be a problem for your crew. Brandon tried to lock me in for thousands. He reached in bryans pocket and pulled it out. Last time I was at Dorchester.

:bigthumb:

Sean
10-13-2011, 07:41 PM
Wish you were closer, Im actually off that day.

Harry
10-13-2011, 07:42 PM
im sure you can unload in the median of ashley phos. or pull in front of some house by the shop

Well that isn't going to work.

03SVTCOBRA
10-13-2011, 07:54 PM
Well that isn't going to work.

Park in one of the shopping centers and drive it the 3/4 or mile. I know its used to the 1/8th, but maybe you can make your 1/8th mile pass and let it roll the rest of the way there.

98nbmz
10-13-2011, 08:01 PM
Well that isn't going to work.

There is a side road next to the shop you should be able to do it. I think there is an autoparts store right there you could do it at, or Like svt said shopping center up the road.

Harry
10-13-2011, 08:08 PM
I think I will just drive it there. Just easier.

csikx
10-13-2011, 08:09 PM
I think I will just drive it there. Just easier.

Love that X5... Do you have more pictures of it?

BAD BOB
10-13-2011, 08:16 PM
I sure they are talking $3 thousand dollars. That shouldnt be a problem for your crew. Brandon tried to lock me in for thousands. He reached in his pocket and pulled it out. Last time I was at Dorchester.

who is they? you had to bring in more folks just to try my stock motor car? DAMN

Harry
10-13-2011, 08:23 PM
Love that X5... Do you have more pictures of it?

http://i448.photobucket.com/albums/qq208/harryfreeman69/IMG_9438.jpg

Harry
10-13-2011, 08:29 PM
Love that X5... Do you have more pictures of it?

Oh and Thanks.

bambooi
10-13-2011, 08:35 PM
Nice garage in the back ground

cmd
10-13-2011, 08:41 PM
Being the super nice person I am... I'll throw this out there... I have a fenced in lot (alarmed) off of cross county mere miles away from said hhp. you could park in our parking lot or put it behind the gate and I'll lock it up.

03SVTCOBRA
10-13-2011, 08:48 PM
Being the super nice person I am... I'll throw this out there... I have a fenced in lot (alarmed) off of cross county mere miles away from said hhp. you could park in our parking lot or put it behind the gate and I'll lock it up.

Simply leave your keys with colin, and he will take good care of it. Tips are welcome of course. Free t shirt to the first 5 people who enter.

slowgreen99
10-13-2011, 08:49 PM
Is there a clean up fee for tearing shit up on the dyno? lol

Harry
10-13-2011, 09:28 PM
Being the super nice person I am... I'll throw this out there... I have a fenced in lot (alarmed) off of cross county mere miles away from said hhp. you could park in our parking lot or put it behind the gate and I'll lock it up.

I appreciate it, but I gotta try and score some points for driving my car.

MonteC
10-13-2011, 09:50 PM
Colin would key your truck anyway.

cmd
10-13-2011, 09:53 PM
The offer stands for anyone

BAD BOB
10-13-2011, 10:15 PM
The offer stands for anyone

even for someone with a fuel cell?

how bout for me?

cmd
10-13-2011, 10:18 PM
Even you Roberto... after all you have a skreetcar

Darryl Buckner
10-14-2011, 09:34 AM
On a lighter note. I too am interested if there is room to unload a trailer?

Because race car!:shock:

Harry
10-14-2011, 09:41 AM
I think I will just drive it there. Just easier.

Because race car!:shock:

Because street car with a fuel cell.:finger:

Darryl Buckner
10-14-2011, 09:42 AM
Because street car with a fuel cell.:finger:

I hope you plan to shoot it on the rollers, if not you only make about 250 hp, I would hate to see Matt make more with the Cobalt..:hysterical:

Harry
10-14-2011, 09:49 AM
Doesn't matter to me who has more HP.

Matts94Z28
10-14-2011, 10:25 AM
I hope you plan to shoot it on the rollers, if not you only make about 250 hp, I would hate to see Matt make more with the Cobalt..:hysterical:

:hysterical: The Cobalt made more TQ than the camaro!

Darryl Buckner
10-14-2011, 10:33 AM
Doesn't matter to me who has more HP.

Shoot it, Shoot it!:bigthumb:

Harry
10-14-2011, 10:59 AM
Shoot it, Shoot it!:bigthumb:

For what, torque converter can't stand it.

cliff-1972
10-14-2011, 02:58 PM
Same ? as as first page.Can diesels be dynoed also??????

cmd
10-14-2011, 03:04 PM
Same ? as as first page.Can diesels be dynoed also??????

negatory sir

ElecTech
10-14-2011, 03:07 PM
Same ? as as first page.Can diesels be dynoed also??????

negatory sir

We don't have the correct pick-up for an RPM signal on a diesel so we could only give you HP vs. MPH. No torque values.

BigdaddyDupree
10-15-2011, 05:27 PM
Ill be there. Low numbers im sure

Carlrx7
10-15-2011, 09:30 PM
If my car is still together I'll bring it out and see what this lil stock LS2 can make.

-Carl

adamcs
10-26-2011, 12:13 PM
Alright well i will be coming down this weekend so hopefully there is a good turnout.

slowgreen99
10-26-2011, 09:24 PM
Im coming and ill be "gruding" my numbers :D

Matts94Z28
10-26-2011, 09:29 PM
Remind me to stand behind the dumpster...

ShawnBoyMoody
10-26-2011, 09:33 PM
Remind me to stand behind the dumpster...

Like this? :hide:

slowgreen99
10-26-2011, 09:35 PM
Ok, Matt, dont forget to stand behind the dumpster. Come shoot your car! It should be ready now right?

Matts94Z28
10-26-2011, 09:36 PM
Ok, Matt, dont forget to stand behind the dumpster. Come shoot your car! It should be ready now right?

Lol! Nah, Still trying to find that "smokelikeamotha" mod you installed.

slowgreen99
10-26-2011, 09:39 PM
Lol! Nah, Still trying to find that "smokelikeamotha" mod you installed.

Oh ok. Guess you still cant live down that I drove my car like everyone said I wouldnt, and had some oil come out of the breathers....damn

Matts94Z28
10-26-2011, 09:41 PM
It only took you 20 extra minutes to get there! You should drive that space ship to the dyno day.

slowgreen99
10-26-2011, 09:45 PM
It only took you 20 extra minutes to get there! You should drive that space ship to the dyno day.

no no, I was talking to the mexican about actually racing. Then I left. And no, ill trailer it. Then we'll go to Dorchester Sunday and you got 8 and the break. Ill drive.

ShawnBoyMoody
10-26-2011, 09:46 PM
B you gonna shoot it on the dyno or just run it on motor?

slowgreen99
10-26-2011, 09:49 PM
B you gonna shoot it on the dyno or just run it on motor?

1 N/A, 1 on the biggun. I already talked to Jeff at HHP, and he said "ill throw you a mop if it doesnt survive" lol

ShawnBoyMoody
10-26-2011, 09:52 PM
1 N/A, 1 on the biggun. I already talked to Jeff at HHP, and he said "ill throw you a mop if it doesnt survive" lol

Hot Damn.

Matts94Z28
10-26-2011, 09:52 PM
Sure you were...

Typical Brandon fashion, call out the man while his transmission is hanging out. Why not drive it? Buckner had the ltd out not too long ago. Harry and Shawnboy are both driving theirs!

8 and the break huh? You will never get privilege to race me again, I've beat you once. I will not partake in your special Olympics. I am not in your "class"... You know, just like you won't race Zac. Lmao.

slowgreen99
10-26-2011, 09:57 PM
Right, and 8 and the break suffices for the "class". Idiot. And I dont need to drive my shit out there, nor did I know your car wasnt up and going. And never said I wouldnt race Zac, but it wouldnt be for free since you keep bringing it up.

Matts94Z28
10-26-2011, 10:01 PM
Blah, Blah, Blah. All I hear are excuses! At least you don't run around claiming "street car" anymore. Also, I forgot you are not on FB, so I take that back about you knowing my car was down. However, I will not join in on your speacial olympics race with retarded stips.

I didn't know that I kept bringing it up the Zac thing... Maybe you just keep thinking about it?

It's been fun sweetie.

cmd
10-26-2011, 10:02 PM
It only took you 20 extra minutes to get there! You should drive that space ship to the dyno day.

Spaceship and unicorns ftw! Lets face it Brandon... That is a RACE car. Might as well gut it... oops I'm too late and Matt when is the converter goin to Cola?

slowgreen99
10-26-2011, 10:03 PM
Ask Zac where he went Friday when the green bitch rolled through the gate? I wasn't going to say anything, but just ask him so I dont look like im being a dick.

slowgreen99
10-26-2011, 10:04 PM
Spaceship and unicorns ftw! Lets face it Brandon... That is a RACE car. Might as well gut it... oops I'm too late and Matt when is the converter goin to Cola?

Fuck, when I drove it yal wouldnt race, so now I dont drive it and you hate it. It's all good. Maybe when yal put some daddy pants on and build something fast, you wont be so mad. Colon, you have 8 and the break too. Just sayins

Matts94Z28
10-26-2011, 10:06 PM
Spaceship and unicorns ftw! Lets face it Brandon... That is a RACE car. Might as well gut it... oops I'm too late and Matt when is the converter goin to Cola?

Wed. morning! Get your to me and it can be dropped off.

Ask Zac where he went Friday when the green bitch rolled through the gate? I wasn't going to say anything, but just ask him so I dont look like im being a dick.

I am sure he will see this. He can answer for himself, but why stay if the track isn't working? Didn't you say the same thing about the track that night? I'm just speculating of course.

Why would you be worried about looking like a dick?

Matts94Z28
10-26-2011, 10:07 PM
Fuck, when I drove it yal wouldnt race, so now I dont drive it and you hate it. It's all good. Maybe when yal put some daddy pants on and build something fast, you wont be so mad. Colon, you have 8 and the break too. Just sayins

44's or 46's?

Oh and I beat you... remember?

cmd
10-26-2011, 10:08 PM
Fuck, when I drove it yal wouldnt race, so now I dont drive it and you hate it. It's all good. Maybe when yal put some daddy pants on and build something fast, you wont be so mad. Colon, you have 8 and the break too. Just sayins

Who in their right mind would wan to drag race a car that leaks more the the Exxon Valdez. And btw lemme get the tbss back on the road and take that race. LOCK that shit in!

98nbmz
10-26-2011, 10:08 PM
Fuck, when I drove it yal wouldnt race, so now I dont drive it and you hate it. It's all good. Maybe when yal put some daddy pants on and build something fast, you wont be so mad. Colon, you have 8 and the break too. Just sayins

Can I get ten and the break?

98nbmz
10-26-2011, 10:09 PM
44's or 46's?

I got some 32's

slowgreen99
10-26-2011, 10:09 PM
Who in their right mind would wan to drag race a car that leaks more the the Exxon Valdez. And btw lemme get the tbss back on the road and take that race. LOCK that shit in!

Ok, by then I may be dead.

And Matt, 38s killa. Just because im fat doesnt mean I wear fat kid pants.

slowgreen99
10-26-2011, 10:10 PM
Can I get ten and the break?

yes

slowgreen99
10-26-2011, 10:10 PM
Who in their right mind would wan to drag race a car that leaks more the the Exxon Valdez. And btw lemme get the tbss back on the road and take that race. LOCK that shit in!

What does my car leak sir?

98nbmz
10-26-2011, 10:10 PM
yes

Cool GG

cmd
10-26-2011, 10:11 PM
[QUOTE=Matts94Z28;139536]Wed. morning! Get your to me and it can be dropped off.QUOTE]

This might be the blonde in me talking but you do mean next wednesday right? Only thing holding in my trans are the lines. I plan to finish up Friday.

slowgreen99
10-26-2011, 10:11 PM
Cool GG

when? ill be at Bowman Friday

98nbmz
10-26-2011, 10:12 PM
when? ill be at Bowman Friday

Chessa sunday.

Matts94Z28
10-26-2011, 10:12 PM
[QUOTE=Matts94Z28;139536]Wed. morning! Get your to me and it can be dropped off.QUOTE]

This might be the blonde in me talking but you do mean next wednesday right? Only thing holding in my trans are the lines. I plan to finish up Friday.


Yep! Next wed.

98nbmz
10-26-2011, 10:12 PM
Car lengths too 500 on 2000 or betta

cmd
10-26-2011, 10:13 PM
Ok, by then I may be dead.

And Matt, 38s killa. Just because im fat doesnt mean I wear fat kid pants.

With as sketchy as your car is you very may well be. It'll only be a couple more weeks.

slowgreen99
10-26-2011, 10:13 PM
Car lengths too 500 on 2000 or betta

You dont have 500, or 2000 boi. And ok on the lengths.

slowgreen99
10-26-2011, 10:14 PM
With as sketchy as your car is you very may well be. It'll only be a couple more weeks.

explain?

98nbmz
10-26-2011, 10:14 PM
You dont have 500, or 2000 boi. And ok on the lengths.

Bet me....

cmd
10-26-2011, 10:14 PM
What does my car leak sir?

Word throught the grape vine says it leaks every fluid a car is supposed to have and one we're not quite sure of.

Matts94Z28
10-26-2011, 10:15 PM
With as sketchy as your car is you very may well be. It'll only be a couple more weeks.

Ugh, that implies that he drives it!

cmd
10-26-2011, 10:16 PM
explain?

couple: means 2
weeks: means 7 days....

slowgreen99
10-26-2011, 10:16 PM
Word throught the grape vine says it leaks every fluid a car is supposed to have and one we're not quite sure of.

Darn. Maybe that's what you need to do then.

slowgreen99
10-26-2011, 10:17 PM
couple: means 2
weeks: means 7 days....

fail. a week is 7 days.

cmd
10-26-2011, 10:20 PM
fail. a week is 7 days.

very good Brandon! your mother must be proud of her big boy! and his WACE CAR

slowgreen99
10-26-2011, 10:22 PM
very good Brandon! your mother must be proud of her big boy! and his WACE CAR

she is. Yours must be pissed. Roll cage, Bias ply slick, and slow....

1998ta__1991rs
10-26-2011, 10:24 PM
Nevermind. I got better shit to do tonight.

slowgreen99
10-26-2011, 10:24 PM
Nevermind. I got better shit to do tonight.

Hells yea. Me too. Im just tired of people talkin shit so I left it alone.

cmd
10-26-2011, 10:25 PM
she is. Yours must be pissed. Roll cage, Bias ply slick, and slow....

She proud that I moved out though... Do you still have backstreet posters on your wall?

slowgreen99
10-26-2011, 10:26 PM
She proud that I moved out though... Do you still have backstreet posters on your wall?

No, theyre NSync. And a Justin B one too.

Matts94Z28
10-26-2011, 10:27 PM
No, theyre NSync. And a Justin B one too.


Makes me think of Austin. Is that weird? :hysterical:

cmd
10-26-2011, 10:31 PM
No, theyre NSync. And a Justin B one too.

:barf::yourock:

98nbmz
10-26-2011, 10:37 PM
Makes me think of Austin. Is that weird? :hysterical:

Your just mad my 17 year old ass would get you arrested :finger:

cmd
10-26-2011, 10:38 PM
Your just mad my 17 year old ass would get you arrested :finger:

ummmmm:gggg:

98nbmz
10-26-2011, 10:42 PM
ummmmm:gggg:

http://i148.photobucket.com/albums/s21/pinewoodbaseball/mullet11.jpg


My Camuro fast.:Finger2:

BAD BOB
10-26-2011, 11:12 PM
will it be too late to show up around 12 or 1?

bwelch
10-27-2011, 04:24 AM
will it be too late to show up around 12 or 1?

:offtopic:

399stroker
10-27-2011, 06:18 AM
How is this being done? First one there is first one to the rollers, is there a list to get on, drawing straws?

Derek
10-27-2011, 09:34 AM
I might try to get to the shop early tommorow so I I can get done and run up there and get some video. What time are y'all kicking off.

Harry
10-27-2011, 09:40 AM
Ok guys you asked for it so here it is. SMAF is helping us host an open dyno day 10/29/2011 from 9 am unitl the last car is run. Dyno rates will be $30.00 for 2 pulls with wideband and print out. If you would like more runs you can get them after all the cars have been run.

:bigthumb:

chrisheltra
10-27-2011, 09:54 AM
Im planning on dragging my little brother up there with me.

LXtasy
10-27-2011, 10:36 AM
We will be there. Hoping for 375 on spray

LadyInRed
10-27-2011, 11:35 AM
I definitely plan on being there for a bit earlier in the day, and hope to get some nice numbers this time instead of 290 ....*snap/bang/scrape*. :hide:

Derek
10-27-2011, 11:44 AM
Thanks Harry one day I will learn to read all the lines.

chrisheltra
10-27-2011, 11:48 AM
Thanks Harry one day I will learn to read all the lines.

What would the fun in that be?

bgstew6
10-27-2011, 12:25 PM
if I dont have anything to do....might drag the fam up there with me to hang out and do what I do best (Bullshit) with everyone...put some names to a few faces I havent met yet....

Shane361
10-27-2011, 02:50 PM
How is this being done? First one there is first one to the rollers, is there a list to get on, drawing straws?

Not sure ow Jeff will do it but I would have a sign up sheet like usual and first ones on the list goes first etc etc:bigthumb:

chrisheltra
10-27-2011, 02:53 PM
I would imagine it will be just like every other one were its first pay first serve. At the time of payment they will put your name on a list in order of who payed when. Theyll call your name when its your turn. Or if you know whos who up there youll just know when its your turn based on who payed ahead of you.

blkscls1z
10-27-2011, 03:22 PM
I'll be out there

Harry
10-27-2011, 03:51 PM
Thanks Harry one day I will learn to read all the lines.

It's all good. Your not the only one to do it.:bigthumb:

Jeff@HHP
10-27-2011, 06:06 PM
We will have dyno sheets for everyone to fill out. After you have filled out the sheet, bring it to our cashier, pay for your runs and we will have you pull your car in line and then the fun begins.


From the amount of post looks like we will have a great turn out. We are looking foward to seeing you guys on Saturday!

LXtasy
10-27-2011, 06:48 PM
We will have dyno sheets for everyone to fill out. After you have filled out the sheet, bring it to our cashier, pay for your runs and we will have you pull your car in line and then the fun begins.


From the amount of post looks like we will have a great turn out. We are looking foward to seeing you guys on Saturday!

give me a call tonight jeff

Jeff@HHP
10-27-2011, 07:30 PM
give me a call tonight jeffAnswer your phone or call me at the shop.

Jeff

1badLTN
10-27-2011, 11:00 PM
Ill be out there too. Might have the truck on the dyno too

JTStreet
10-28-2011, 06:35 AM
I may come hang out, but I doubt I'll put the Mustang on the rollers. I was hoping to have my Ford GT cams dropped in by now, but I've been busy getting the new DD up to snuff.

Red99T/A
10-28-2011, 06:39 PM
I'll be out there tomorrow. Looking forward to it!

BigdaddyDupree
10-28-2011, 07:30 PM
I'll be out there tomorrow. Looking forward to it!

Are you gonna dyno?

Red99T/A
10-28-2011, 08:26 PM
Are you gonna dyno?

Planning on it.

BigdaddyDupree
10-28-2011, 09:09 PM
Planning on it.

Hell yes

Red99T/A
10-28-2011, 09:16 PM
I figure its always fun to be totally disappointed and get your feelings hurt lol

Carlrx7
10-28-2011, 09:28 PM
ill be happy with a clean pull period. be glad to see over 600whp, excited to see over 700whp, will do f'n cartwheels if over 800whp...

-Carl

Red99T/A
10-29-2011, 10:18 AM
Heading up there now. See you guys soon!

Matts94Z28
10-29-2011, 10:26 AM
Headed up there soon.

ShawnBoyMoody
10-29-2011, 07:57 PM
Great time, thanks to Jeff and Co. Glad I could get off the toilet long enough to check it out.

chrisheltra
10-29-2011, 08:02 PM
Great time, thanks to Jeff and Co. Glad I could get off the toilet long enough to check it out.

Do we need to put you on suicide watch?

ShawnBoyMoody
10-29-2011, 08:12 PM
No man, you didnt get to see my pulls?

LXtasy
10-29-2011, 08:20 PM
Very nice turnout. Had a good time today. Thanks hhp and crew

minytrker
10-29-2011, 08:48 PM
So what are results??? How many people disappointed with the numbers?

chrisheltra
10-29-2011, 08:53 PM
No man, you didnt get to see my pulls?

Nah I dipped out as you were pulling up to the rollers.

WTFWSAT
10-29-2011, 08:53 PM
Who had high hp? Did the green machine let loose? Haha

ShawnBoyMoody
10-29-2011, 08:53 PM
How many people disappointed with the numbers?

Not me! Silver car put down 462 hp and 435 ft. lbs on mota. :mrgreen:

ShawnBoyMoody
10-29-2011, 08:56 PM
Who had high hp? Did the green machine let loose? Haha

Far as I know I had the highest NA numbers. Green car did not make an appearance. Something about Marcus not being able to make it lol. :joke: Brandon said the rear-end is torn up in the car.

ShawnBoyMoody
10-29-2011, 09:21 PM
I believe BAD BOB had the highest numbers overall. Somebody correct my if I'm wrong.

csikx
10-29-2011, 09:52 PM
Not me! Silver car put down 462 hp and 435 ft. lbs on mota. :mrgreen:

DAMN!!! 10 second car? 1/4 mile?

ShawnBoyMoody
10-29-2011, 10:38 PM
DAMN!!! 10 second car? 1/4 mile?

http://i80.photobucket.com/albums/j164/shawnboymoody/images.jpg

LXtasy
10-30-2011, 12:24 AM
I think out of the top 5, four were ls powered. Correct me if I am wrong. Blazer put down 543hp and 553 tq through the old 4l60e.

trickey
10-30-2011, 06:18 AM
Had a great time, saw some high numbers and some lows. Was able to put some faces with CHP screen names. Seems that all the cars and trucks were driven in except the rock crawler.............

chrisheltra
10-30-2011, 07:48 AM
I think out of the top 5, four were ls powered. Correct me if I am wrong. Blazer put down 543hp and 553 tq through the old 4l60e.

Unfortunately, the only one that broke was also ls powered. :poke:

I feel really bad for him. Such a beautiful car.

jmd
10-30-2011, 08:05 AM
who broke?

bambooi
10-30-2011, 08:22 AM
who broke?

X2 and what happen?

trickey
10-30-2011, 08:36 AM
Bad with names. Beautifully restored Black super charged 67 Camaro. Snapped the snout of the crank.

Carlrx7
10-30-2011, 08:44 AM
i was happy to get some clean pulls in, second pull made 640hp/707tq @ 10psi

shooting for 14psi, oh well.. they are only numbers.. i want that 9 sec time slip!!

-Carl

cmd
10-30-2011, 09:41 AM
SLOWGREEN73 'S dad broke. cog drive supercharged ls broke the snout off the crank. Bad bob was #1, Carl was 2nd Matts L was up pretty high as well... Hal and Adam both had 500+hp pulls with nawz.

There was a 240 out there the put something like 463 to the tires

Think they should do this anually. Had a great time.

I don't know if Mikey gets on here but his duster sounds badass

02_L#416
10-30-2011, 10:02 AM
Had a good time, got to meet some new people and was happy to see 566/661 on the turtle tune

slowgreen99
10-30-2011, 11:26 AM
I had to have an excuse so I didnt knock heads off on the track AND dyno. Gotta let others enjoy being number 1 every once in a while..

LXtasy
10-30-2011, 11:35 AM
I had to have an excuse so I didnt knock heads off on the track AND dyno. Gotta let others enjoy being number 1 every once in a while..

:gggg:

Red99T/A
10-30-2011, 11:36 AM
Thanks to Jeff and the whole HHP crew for putting this on! Had a great time and got to put a lot more faces to names and cars. The WS-6 put down a pretty tame 286/301, pretty much about where I thought it would be.

csikx
10-30-2011, 11:39 AM
I had to have an excuse so I didnt knock heads off on the track AND dyno. Gotta let others enjoy being number 1 every once in a while..

+rep

chrisheltra
10-30-2011, 11:50 AM
I didnt see as many street driven race cars as I expected. Kudos to Bad Bob for showing up.

BigdaddyDupree
10-30-2011, 12:06 PM
Thanks to Jeff and the whole HHP crew for putting this on! Had a great time and got to put a lot more faces to names and cars. The WS-6 put down a pretty tame 286/301, pretty much about where I thought it would be.

If you ever mod that thing you will know how a good baseline. 10 dynographs later

Red99T/A
10-30-2011, 12:13 PM
If you ever mod that thing you will know how a good baseline. 10 dynographs later

This was the white car, not the red one. First time I have had my new car on the dyno.

BigdaddyDupree
10-30-2011, 12:19 PM
Ah

JTStreet
10-30-2011, 12:50 PM
If it's not a secret, what numbers did Bad Bob put down?

LadyInRed
10-30-2011, 12:58 PM
Had a good time out there, wished we could have hung around a bit longer :)

I think I fell in love with that 67 Camaro.

MonteC
10-30-2011, 12:59 PM
Thanks to Jeff and the whole HHP crew for putting this on! Had a great time and got to put a lot more faces to names and cars. The WS-6 put down a pretty tame 286/301, pretty much about where I thought it would be.



I think the cobalt put down very similar numbers.

LXtasy
10-30-2011, 01:00 PM
I think the cobalt put down very similar numbers.

lock that in

bwelch
10-30-2011, 01:01 PM
The G8 put down 318hp 335tq on motor.

k5hart
10-30-2011, 01:05 PM
Sounds like a great time! I'm so pissed I missed it!! Fixing the f'in dishwasher and playing domesticated dad ruined my day. Next time I guess.

blkscls1z
10-30-2011, 01:23 PM
Had a great time yesterday. Thanks HHP.

BAD BOB
10-30-2011, 01:30 PM
yeah good time yesterday! car made just over 700 and was able to drive it home

cmd
10-30-2011, 01:37 PM
yeah good time yesterday! car made just over 700 and was able to drive it home

sandbagger... turn it up!

Matts94Z28
10-30-2011, 01:44 PM
Thanks for putting the event on! Had a great time as always.

Also, Kevin said his dad's 67 didn't break the crank, the balancer just came off.

chrisheltra
10-30-2011, 01:54 PM
Thanks for putting the event on! Had a great time as always.

Also, Kevin said his dad's 67 didn't break the crank, the balancer just came off.

Were did all the oil come from?

BigdaddyDupree
10-30-2011, 01:56 PM
The pulley is pressfit on the crankshaft. If it comes off oil will spew out of there.

cmd
10-30-2011, 02:03 PM
I made 412hp Think it was 2nd highest na dyno of the day. Time to change up and get some bigger numbers!

Matts94Z28
10-30-2011, 02:05 PM
coughtunecough

cmd
10-30-2011, 02:09 PM
coughnewcarcough

Matts94Z28
10-30-2011, 02:16 PM
ugh

cmd
10-30-2011, 02:26 PM
It wont always be ugh... It'll be all "hells yeah hot damn"

MonteC
10-30-2011, 04:11 PM
Were did all the oil come from?

:hysterical:

BAD BOB
10-30-2011, 09:29 PM
Thanks for putting the event on! Had a great time as always.

Also, Kevin said his dad's 67 didn't break the crank, the balancer just came off.

im pretty sure it looked like the end of the crank that the pulley slides over broke off

Matts94Z28
10-30-2011, 10:08 PM
im pretty sure it looked like the end of the crank that the pulley slides over broke off

Just going by what the owner said...

adamcs
10-30-2011, 10:34 PM
im pretty sure it looked like the end of the crank that the pulley slides over broke off

When we were looking at it, it looked like it was broken off you could see the piece of it still in the balancer im pretty sure.

ShawnBoyMoody
10-30-2011, 10:42 PM
It could not have broken as LS motas are impervious to breakage.

Matts94Z28
10-30-2011, 10:44 PM
I am sure they are right. I doubt Kevin's dad knows what he is talking about... :roll:

adamcs
10-30-2011, 10:57 PM
I am sure they are right. I doubt Kevin's dad knows what he is talking about... :roll:

lol im not saying that, im just saying thats what was said at the time, the bolt could have broken though because the balancer was hanging there with the bolt still in it, who knows.

Matts94Z28
10-30-2011, 10:58 PM
Yup! I was rolling my eyes at badbob simply because racecar.

SLOWGREEN73
10-31-2011, 08:21 AM
The cranks not broke it. The balancer had a single pin that sheered and spun the balancer off, should be fixed this week and back on the dyno since he didn't get any numbers with the new pulley.

ElecTech
10-31-2011, 08:24 AM
The cranks not broke it. The balancer had a single pin that sheered and spun the balancer off, should be fixed this week and back on the dyno since he didn't get any numbers with the new pulley.

That's good to hear. Tell him to bring on the bean grinder! We'll give him some more pulls. No charge.

slowgreen99
10-31-2011, 10:37 AM
That's good to hear. Tell him to bring on the bean grinder! We'll give him some more pulls. No charge.

Can I have a raincheck too? :hide:

Went to the track last night after taking the cover off the rear end, and nothing seemed broken. Car did fine, other than still hearing a little pop noise. O well. Cant fix it if I dont know whats giving up.

Shane361
10-31-2011, 11:14 AM
SLOWGREEN73 'S dad broke. cog drive supercharged ls broke the snout off the crank. Bad bob was #1, Carl was 2nd Matts L was up pretty high as well... Hal and Adam both had 500+hp pulls with nawz.

There was a 240 out there the put something like 463 to the tires

Think they should do this anually. Had a great time.

I don't know if Mikey gets on here but his duster sounds badass

Heard 811 was the highest...

ElecTech
10-31-2011, 11:23 AM
Can I have a raincheck too? :hide:

Went to the track last night after taking the cover off the rear end, and nothing seemed broken. Car did fine, other than still hearing a little pop noise. O well. Cant fix it if I dont know whats giving up.

Maybe. I'll check with the boss, but I think we may be able to do something. Sounds like a pinion bearing might be pulverizing itself. Maybe a u-joint?

Jeff@HHP
10-31-2011, 03:18 PM
Can I have a raincheck too? :hide:

Went to the track last night after taking the cover off the rear end, and nothing seemed broken. Car did fine, other than still hearing a little pop noise. O well. Cant fix it if I dont know whats giving up.

We will give you a rain check as you did make an appearance......j/k wish you had brought the car but we will take care of you.

Jeff

Mikey@hhp
10-31-2011, 03:22 PM
SLOWGREEN73 'S dad broke. cog drive supercharged ls broke the snout off the crank. Bad bob was #1, Carl was 2nd Matts L was up pretty high as well... Hal and Adam both had 500+hp pulls with nawz.

There was a 240 out there the put something like 463 to the tires

Think they should do this anually. Had a great time.

I don't know if Mikey gets on here but his duster sounds badass

Yes I get on here, not as often as I would like cause you know im always working. But thanks about the car. Hopfully once I get the brakes fixed I can do a real burnout.

slowgreen99
11-02-2011, 11:38 AM
Maybe. I'll check with the boss, but I think we may be able to do something. Sounds like a pinion bearing might be pulverizing itself. Maybe a u-joint?

No idea, but after a few nitrous hits and decent 60 foots, all seems well.

Mike
11-02-2011, 12:08 PM
Heard 811 was the highest...

:drool:

ElecTech
11-02-2011, 12:29 PM
No idea, but after a few nitrous hits and decent 60 foots, all seems well.

Ride that horse til it lays down!

bambooi
05-06-2012, 09:12 AM
Jaime you have been pmd. When is the next dyno day?

ElecTech
05-06-2012, 10:00 AM
Jaime you have been pmd. When is the next dyno day?

Most likely not until the fall. Maybe October/November time frame.

Not too many people like spinning the rollers in the mid-year heat.

Carlrx7
05-06-2012, 10:28 AM
Most likely not until the fall. Maybe October/November time frame.

Not too many people like spinning the rollers in the mid-year heat.

iat table! sae corrected, if i was spraying or had meth, id only dyno in the summer. make my numbers look HUGE!!