PDA

View Full Version : Feeler for a dyno day........


DolSVT00
01-13-2008, 08:21 PM
Ok here's the deal This could go two ways,
1. The guys from Show Zone can set us up a dyno day for us alone on a saturday...... My part of the agreement would be I need at least 10 people to get the low "Group " price of 50-60$ with A/F on their AWD Mustang dyno....... I would need to set a date and time.

2. The guys on "another" forum asked me If I wanted to participate in their Dyno Day, 50$ w/AF on a "2WD ONLY Dynojet Dyno" this takes place Jan 29 th at a shop off Dorchester rd, I could ask if they minded if we joined them. I dont think that would be a problem because the more they get the less it costs.


Give me some feedback guys, I'd really like to set something up.

LXtasy
01-13-2008, 08:27 PM
If "we" do one could it be maybe in March? or April evening? I know of some projects that might be finished with motorswaps by than

05Saleen
01-13-2008, 09:43 PM
Where is there one off Dorchester Road???
GSC is fine. Sat would be better for me.

DolSVT00
01-13-2008, 10:33 PM
Where is there one off Dorchester Road???
GSC is fine. Sat would be better for me.
AV Performance

I've heard GSC is moving and will no longer have a dyno, besides I dont wanna drive that far.

I also prefer an AWD dyno so the subie guys could be included.............

perm102
01-13-2008, 11:25 PM
I would be in for a dyno. Saturday would be the only day that I could make it though.

chrisheltra
01-14-2008, 06:23 AM
Im down

Audie1
01-14-2008, 12:23 PM
Sounds good, always wondered what kind of numbers I'd put out with pump gas.

slow04
01-14-2008, 04:54 PM
:twisted: Rick and Linn said they would be up for it :shock:

Richard Head
01-14-2008, 06:09 PM
:twisted: Rick and Linn said they would be up for it :shock:
Troulble maker. :twisted:

Jeff
01-14-2008, 07:17 PM
I second going to Showzone ! Collin has a nice dyno and plus more people could participate since he has an AWD dyno .

Audie1
01-15-2008, 06:36 AM
Guys,
I did not meant to jump the gun or anything with the Dyno, I had already made plans previously to run my car. I just need to get my spark problem fixed before I go again. :wink:

WTFWSAT
01-18-2008, 09:05 PM
Any more info in a dyno day ?? Im in as long as i dont have to work :)

DolSVT00
01-19-2008, 12:28 PM
Any more info in a dyno day ?? Im in as long as i dont have to work :)

I can set it up within 2 weeks of the decision date, I just wanted to know if I could get enough participation to make it worthwile to the shop and get us a low cost rate at the same time.

I have also talked to them about maybe bringing a grill and doing a cookout at the same time.

wade w
01-19-2008, 02:34 PM
I would like to bring the car. as long as its on a saturday. Its never been on a dyno.

clubracergt1
01-19-2008, 03:15 PM
Definately would be down end of March, early April. My swap should be done by then.

slow04
01-19-2008, 04:15 PM
Any more info in a dyno day ?? Im in as long as i dont have to work :)

I can set it up within 2 weeks of the decision date, I just wanted to know if I could get enough participation to make it worthwile to the shop and get us a low cost rate at the same time.

I have also talked to them about maybe bringing a grill and doing a cookout at the same time. :twisted: Anderson is a long way for a cookout..ain't it?

05Saleen
01-19-2008, 04:31 PM
Any more info in a dyno day ?? Im in as long as i dont have to work :)

I can set it up within 2 weeks of the decision date, I just wanted to know if I could get enough participation to make it worthwile to the shop and get us a low cost rate at the same time.

I have also talked to them about maybe bringing a grill and doing a cookout at the same time. :twisted: Anderson is a long way for a cookout..ain't it?

I thought they use an open pit in the Jungle??? :lol:

DolSVT00
01-19-2008, 07:41 PM
Any more info in a dyno day ?? Im in as long as i dont have to work :)

I can set it up within 2 weeks of the decision date, I just wanted to know if I could get enough participation to make it worthwile to the shop and get us a low cost rate at the same time.

I have also talked to them about maybe bringing a grill and doing a cookout at the same time. :twisted: Anderson is a long way for a cookout..ain't it? :finger:

Richard Head
01-19-2008, 10:05 PM
I can see this is headed to trash talk! HAHA :poke:

chrisheltra
01-20-2008, 01:48 PM
:twisted: Anderson is a long way for a cookout..ain't it?

Whats wrong your not up for a road trip?

Randy Im good for when ever. Just post up the date when it all gets sorted out.

SlowBlk4dr
01-21-2008, 04:10 PM
I am game since some of those boys have been wanting me to "bring it over to the shop" ...


8)

wade w
01-22-2008, 05:17 AM
:twisted: Anderson is a long way for a cookout..ain't it?


Are we talking about Andeson as in upstate S.C. Anderson. Up by Clemson.

1iron
01-22-2008, 09:29 AM
Screw Jacson let's run the simulated 1/4 mile.

Paul

chrisheltra
01-22-2008, 09:43 AM
Im down for that my times were a lot faster that way:) :poke:

Chillerman
01-22-2008, 08:41 PM
I'm good for a dyno day. Always wanted to do an eddy-current dyno run anyways. Just never wanted to drive to Anderson, SC to do it.